The Lofts@SixMileCreek project topped-off last Thursday by holding a ceremony with the Mayor, City Officials, the press, and the public. The 7-story, 49,244 square foot project is aiming for completion in early 2015, and will contain 45 rental apartment units.
The structural erection was done by Rochester Rigging and Erectors, and utilized the Girder-Slab® precast concrete plank flooring system, which sets on top of D-Beam® girders, is grouted at the seams, and allows for quicker installation, and 8-10″ floor depths, which helps maximize floor-to-ceiling heights, and minimize the height of the building. The 7-story structure is considered a high-rise by building codes, thus the heavy-gauge construction.
Lofts@SixMileCreek, the name for the Cayuga Place/Cayuga Green 2 project is now official, and the top-out ceremony is this coming Thursday, October 2nd at noon (12:00). Topping-out (or “topping off”) is when a building’s structural assembly is complete, generally when the highest point of the structure is finished.
The 7-story, 45-unit, 49,244 GSF project from Bloomfield/Schon + Partners out of Cincinnati, Ohio has been moving right along, as the final columns and beams of the structure are craned-in and secured, and concrete plank floors are installed this week and next. The ground floor has been levelled and plastic sheeting and steel mesh has been put down to prepare for a concrete pour for the slab floor. The core assembly began back in July, with the steel assembly following-up in early August. The project is being constructed by Turnbull-Wahlert Construction.
Here’s the Press Release announcement: Presenting the Topping Out Ceremony of Downtown Ithaca’s newest residential construction Lofts@SixMileCreek on October 2, 2014 at 12pm.
Celebrate a traditional “Topping Out” as developer Bloomfield/Schon + Partners and Turnbull-Wahlert Construction hoist the final beams to the top of these contemporary and luxurious loft-style living apartments Lofts@SixMileCreek. Currently under construction, Lofts@SixMileCreek is located at 217 South Cayuga Street, downtown Ithaca, NY. Completion is scheduled for early 2015.
On October 2, 2014 at 12pm, Cincinnati developer Steve Bloomfield and Ken Schon, the crew of Turnbull-Wahlert Construction, Mayor Svante Myrick, alongside community business members, will address the high demand for loft- style apartments in downtown Ithaca. The ceremony is a construction tradition topping out the highest point of construction. Lofts@SixMileCreek is a 45-unit, sophisticated loft-style living masterpiece. Located at 217 South Cayuga Street, downtown Ithaca, just off of the Six Mile Creek Walk. The Lofts@SixMileCreek is the second building of Cayuga Place that includes apartments, retail and office space.
Lofts@SixMileCreek will be comprised of upscale studio, one and two bedroom loft apartments with high-end finishes such as stone countertops and upgraded appliances. Built under green construction methods, these energy efficient, elegant apartments will have spectacular views along Six Mile Creek. Balconies and terraces will be available on most units. Park your car in the Cayuga Street parking garage and enjoy direct access to the new building. Leasing information should be available by November 2014. Refreshments will be served.
Contact firstname.lastname@example.org or follow us on Twitter @Lofts6MileCreek. Check back to our website www.IthacaLofts.com in November when we will present leasing information, unit availability, interior photos, amenities, floor plans, building layouts and exciting new perks of living in Lofts@SixMileCreek.
Project financing through First Niagara.
Downtown Ithaca’s Cayuga Place Residences project shows forward progress on construction in the past two weeks, as two more precast hollow-core concrete decks have been installed for floors two and three. Steel cross-beam assembly is done before each deck is installed, and by the looks of it, the fourth floor is just about ready for its floor.
The seams between each deck plank are covered over with a concrete topping or filler, a process referred to as “leveling and grouting” the plank floor. Often times, a steel mesh of welded wire is installed over top, then a concrete topping mix to finish the surface (depends on the type of floor that has been engineered, and the planks used). On top of that of course, carpet/tile, etc.- finished floor materials go in.
The Cayuga Place Residences project has moved forward since the last check-in on August 20th for steel assembly: the second floor hollow core plank has been set in place between all 16 columns, and it looks as if the ends have been filled solid, which produces a higher-strength floor. Steel beams span the length of the third floor, so we should see the next floor set this week or next.
Structural steel assembly began last week on the 7-story, 45-unit, 49,244 GSF Cayuga Place Residences project from Bloomfield/Schon + Partners out of Cincinnati, Ohio. The scaffolding for the block wall construction and ledger boards was taken off-site, and steel columns and beams have arrived with a telescoping boom crane and lift to hoist and tie-in the connections. The 16 columns currently set extend to the 5th floor level, and are topped-off with joining plates to secure framing for the remaining floors.
The 7-story, 45-unit, 49,244 GSF Cayuga Place Residences project from Bloomfield/Schon + Partners being constructed by Turnbull-Wahlert Construction out of Cincinnati, Ohio has completed the core section of block walls, and the scaffolding was on its way back down on August 5th (when these were taken) to install steel ledger boards for the floor framing and other prep-framing work before the two stairs and elevator start to be assembled. There’s an additional parallel block wall, which will likely be assembled as steel framing makes its way up each level with framing fastened between the core and block wall. Construction has taken a brisk pace, as the supporting foundation work began early May, and finished-up later on in June, then block work began late June/early July.
Bloomfield/Schon + Partners is also set to take on a large $20-30 million industrial-reuse project in Cincinnati, at the site of the former Peters Cartridge Factory (14-acre, 250,000 square foot). The plan is to clean-up the site, keep the structure, and build-out 100 loft-style apartments.
Bloomfield/Schon + Partners‘ 45-unit, 49,244 gross square-foot Cayuga Place Residences Project has been moving full steam ahead with core concrete block work in the last few weeks, and looks on-pace for the final 7th story this week or early next. The foundation was finished-up in late June, which included foundation footers supported by steel auger micropiles.
The project will be joining Breckenridge Place (50 apartments) and Seneca Way (office space plus 38 apartments) as recently completed downtown projects.
Well, there is no available time wasted here, as foundation footings and walls have wrapped-up and we are on to block work for the stairwell towers and elevator shaft on the western wall of Bloomfield/Schon + Partners’ Cayuga Place Residences project that will rise to seven stories. It had never occurred to me to take photos from the parking garage until B.C.’s post here, but this should be a fun project to watch from many different angles and elevations. General construction by Turnbull-Wahlert Construction of Cincinnati, Ohio. The building will contain 45 market-rate apartment units, with a walkway into the adjacent Green Street Parking Garage.
The foundation footings are being set on top of the STELCOR auger micro-piles for soil support, with rebar sticking-out to tie-in the walls as they’re built-up. The foundation corners have plates with bolts on top of the footings for structural steel to form the building superstructure. The foundation walls are poured in certain areas between these large rectangular footings at specific dimensions, according to the weight they will hold. The footings supported by the micro-piles take the major point loads of the structure. The long solid footing with the high rebar heights will be holding the stairwells, elevator shaft, and utility rooms.